|
| Typ |
EMI接收机 |
| FCKL
1528 |
EMI-Receiver acc. CISPR 16, 9 kHz - 30 MHz, 3 Detectors:
Quasipeak, Peak, Average, Attenuator with 1 dB steps, Protected Input,
Automatic Calibration w. built-in Pulse Generator Manual |
| FCKL 1528 Opt IEEE 488 |
Option: IEEE-488 Interface for use with
Schwarzbeck-Software |
| FCKL 1528 Opt. XY-Rec. |
Option: 25-pin connector on the back side with analogous
voltages for frequency and Interference voltage to connect an
XY-recorder. |
| FCKL 1528 Opt Mitl. |
Option: Built-In Tracking Generator, Output Level 120
dBμV. |
| FCKL 1528
Opt. Softw. |
Option: Schwarzbeck-Software FCKL for EMI-Measurement Download
Demo Version Measuring time limited to 90s [图片] |
| FCVU
1534 |
EMI-Receiver acc. CISPR 16, 20 - 1050 MHz, 3 Detectors:
Quasipeak, Peak, Average, Attenuator with 1 dB steps, Protected Input,
Automatic Calibration w. built-in Pulse Generator Manual |
| FCVU 1534 Opt. IEEE 488 |
Option: IEEE-488 Interface for use with
Schwarzbeck-Software |
| FCVU 1534 Opt. XY-Rec. |
Option: 25-pin connector on the back side with analogous
voltages for frequency and Interference voltage to connect an
XY-recorder. |
| FCVU 1534 Opt. Mitl. |
Option: Built-In Tracking Generator, Output Level 120 dBμV
P.D. |
| FCVU 1534
Opt. Softw. |
Option: Schwarzbeck-Software FCVU for EMI-Measurement Download
Demo Version Measuring time limited to 90s |
| FCVU 1534
Opt. VV |
Option: Coaxial powered preamplifier 10 dB |
| FCLE
1535 |
EMI-Receiver acc. CISPR 16-1, 9 kHz – 3.25 GHz, 3 Detectors:
Quasipeak, Peak, Average, Protected Input, Automatic Calibration w.
built-in Pulse Generator Manual [图片] |
| FCLE 1535 Opt. IEEE 488 |
Option: IEEE-488 Interface for use with
Schwarzbeck-Software |
| FCLE 1535
Opt. Softw. |
Option: Schwarzbeck-Software FCLE for EMI-Measurement Download
Demo Version Measuring time limited to 90s |
| INES PCI 488 |
IEEE 488 16-bit PCI-Slot PC Plug-In Card (BKAB 488
necessary) |
| INES PCMCIA 488 |
IEEE 488 16-bit PCMCIA (Type II) Plug-In Card for portable
Computers (Notebook) including 2 m cable |
| BKAB 488 |
IEEE 488 cable, 2 m, necessary for PCI card, not necessary
for PCMCIA card |
![[图片]](http://www.kilosense.com/schwarzbeck/EMI-Receivers/screen4.bmp){kind=link}
![[图片]](http://www.kilosense.com/schwarzbeck/EMI-Receivers/1535a.jpg){kind=link}